16-23 TOYOTA TACOMA NEW SWITCHED LED FRONT FOOTWELL KIT DUAL OUTPUT
YEAR WARRANTY
DESIGNED IN USA
Description
Modern Lighting: Get the look and feel of a high-end luxury vehicle. The VLEDS Dual Output footwell kit will improve your driving experience by adding comfort and safety.
New Harness: Like the previous version, there is no splicing or tapping into your factory wires. The new, easier-to-install OEM-style breakout harness by Redside Electric now installed between the factory harness and the overhead panel assembly. This harness enables parallel functionality by combining footwell and dome lights with the factory overhead light switch.
Courtesy Mode: Open the door, and the lights are at full output (200LM per side) and fade out with the map and dome light when the door is closed.
Night Mode: While driving at night, a soft ambient light adds a sense of spaciousness throughout the cabin. If you want it brighter, use the included screwdriver and turn it up to your liking. The output is factory set to approximately 10LM (the lowest setting).
5X Brighter The striplight bars are small but produce a considerable amount of light compared to cheap, flexible strip lights that are ten times the size. No plastic or fiberglass parts here! The circuit boards are aluminum metal core PCBs housed in a CNC'd aluminum (not cast) body and then finished with a high-quality exterior-grade black anodizing. They not only look amazing, but they will last you for years!
Highlights
-
Plug-N-Play OEM type breakout harness (installs above overhead switch panel).
-
Beautifully CNC'd all-aluminum body striplight bar with satin black anodized finish.
-
Built-in current limiting resistor and diode protect the strip from reversed polarity installation.
-
Connections Over-molded 2-pin connectors for easier installation and better reliability.
-
Super-strong LSE 3M double-sided tape for mounting.
-
Proprietary 3014 chips mounted on an aluminum PCB that match all VLEDS LED bulbs.
Warranty
This product comes with a 3-year warranty supported by VLEDS. We do not require the product to be shipped back to us. Improper product installation, as well as any system components or wiring modifications, will void all warranties. See our full Warranty Details for more details.
What's Included
1X - Redside Electric OEM-style Harness
2X - LED Bar Lights
2X - LSE VHB Tape for Smooth Surfaces
2X - VLEDS High/Low PWM Dimmer
1X - Dimmer LSE Mounting Tape
1X - PWM Adjustment Screwdriver
1X - Switched OEM-style Breakout Harness by Redside Electric
1X - 4 Foot Wire Extension
8X - Small Zip Ties
FREQUENTLY BOUGHT TOGETHER
-
REAR FOOTWELL LED LIGHT KIT ADD-ONAs low as $40.00 $50.00 PER KIT -
-
-
16-23 TOYOTA TACOMA STANDARD VTAILSAs low as $160.00 $200.00
PER KIT -
16-23 TOYOTA TACOMA HIGH BEAMAs low as $176.00 $220.00
PER PAIR -
16-23 TOYOTA TACOMA LOW BEAMAs low as $176.00 $220.00
PER PAIR -
-
16-23 TOYOTA TACOMA LPX LICENSE PLATE LIGHT BAR$136.00 $170.00 PER KIT -
16-23 TOYOTA TACOMA LPR LICENSE PLATE REVERSE LIGHT BAR$112.00 $140.00 PER KIT
| Output (Each) | 400LM TOTAL |
|---|---|
| Current Draw @ 14.4V | 0.5A |
| Operating Voltage | 12-18V |
| Light Source | 3014 Proprietary Chip |
| Driver Style | Resistors |
Which color should I choose?
Color temperature is primarily a style choice, but the human eye perceives a whiter light as brighter. The image below shows a side-by-side comparison of our six choices. 5000K is natural white, 5500K is pure white, and 6000K is white with a tint of blue. As for the color options, Aqua is a very close match to the backlighting of the buttons and switches. Blue is a deep true blue, and Red is a vibrant, rich red. Choosing a color is ultimately up to you, depending on your lighting goals. The higher Kelvin number DOES NOT mean the light will be brighter it is quite the opposite. The higher the Kelvin, the lower the output.
Will the color match my off-brand LED bulbs?
It's nearly impossible to get an EXACT match in color temperature because of variations in the manufacturing of LED products. The only way to make sure that you get a perfect match between products is to purchase all your LEDs from us, as we have the highest standards in color temperature accuracy.
Many online retailers sell standard off-the-shelf LED products, and the options can be overwhelming. Here are ten reasons you can trust us with your LED lighting needs.
1. Our brand
We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential, allowing us to provide you with the best products possible.
2. We're an established company that isn't going anywhere
We've been in business for 19 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys worldwide.
3. Excellent customer service and technical support
We pride ourselves on offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.
4. 25+ years of combined experience
Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.
5. Low-cost, flat-rate shipping with same-day order processing and full visibility tracking.
We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.
We accept PayPal, Affirm, and all major credit cards.
Life gets busy, so you've got time with our 60-day return policy.
8. Great warranty with fast replacements
In most cases, you are not required to ship back your defective item. See details here.
9. Largest selection of LED products and replacement bulbs
We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.
10. Easy to use website
Designed with the user in mind:
-
Simple navigation with a year make model bulb finder ensures you get the right part for your application
-
Clear and quality product photos so you know exactly what you're getting
-
Informational product descriptions
-
Specs and data on nearly every product
-
Install guides for the more complicated items
