Need help? Our customer service team is ready to assist!

1.844.640.3813

Support Center

50W LOAD

4 LED TURN SIGNAL HYPERFLASH FIX

Rating:
95% of 100
SKU
VLR_3_DUO_WC_2
$36.00 $40.00 ON SALE PER PAIR

In stock

YEAR WARRANTY
DESIGNED IN USA

Exclusive The VLR-3 is by far the cleanest and safest way to add load to any vehicle lighting system. These resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Application If your vehicle uses the front turn signal as a DRL, the best way to add load is on the rear turn signals so they are not continuously active in DRL mode. The VLR-3 is also used where adding load to the front and rear circuits is more difficult. This enables you to install one resistor per side (front or rear) instead of four VLR-6s.

Construction Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market.

Mounting The supplied High Temp mounting tape can be used to adhere the resistor body to a flat, clean metal surface on the vehicle. As an extra precaution: VLR resistors should be mounted out of harm's way and should not touch any plastic or other wiring.

For exterior applications we recommend filling the DuoTap with our dielectric grease.

TECHNICAL SPECS

Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Each Resistor= 2 standard filament bulbs (equivalent wattage: 50W)

Learn more about adding load to your lighting system HERE.

Plug N' Play Install the inline adapter between factory bulb connector and new input connector (harness, LED, etc.).
Waterproof Fully potted and uses waterproof connectors
Mounting Can be installed with included high temp mounting tape or screws
Safer Temperature Max Temp = 250°F (121°C)
More Information
Output 50W LOAD
Current Draw @ 14.4V 4.5A
Operating Voltage 1-18V
Wire Type Silicone 120° C
Finish Type Anodized
Dimensions 80mm x 40mm x 12mm
Material 6061 Aluminum
Wire Length 250mm (10")
Contact Material Gold Plated
Resistor Value 3 Ohm
Mounting High Temp Tape or Screws
Plug Connection Style 2 Pin Waterproof Connector (WC)
Electrical Connection Splice / Tap
Load Equivalent 2 Turn Signal Bulbs
Temperature (Continuous) 300° F
Temperature (Momentary) 200° F
Write Your Own Review
Write a Review4 LED TURN SIGNAL HYPERFLASH FIX
2x VLR-3 Resistor
2x DUO_TAP Harness
2x 3M Mounting Tape

Ten Reasons Why

Many online retailers are selling standard off-the-shelf LED products. There are so many options that it gets overwhelming.

Here are the ten reasons you can trust us with your LED lighting needs.

1. Our brand

We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential and allow us to provide you with the best products possible.

2. We're an established company that isn't going anywhere

We've been in business for 18 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys all over the world.

3. Excellent customer service and technical support

We pride ourselves in offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.

4. 25+ years of combined experience

Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.

5. Low-cost, flat-rate shipping with same-day order processing and full visibility tracking.

We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.

6. Secure payments

We accept PayPal, Affirm, and all major credit cards.

7. 60 day return

Life gets busy, so you've got time with our 60 day return policy.

8. Great warranty with fast replacements

In most cases, you are not required to ship back your defective item. See details here.

9. Largest selection of LED products and replacement bulbs

We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.

10. Easy to use website

Designed with the user in mind:

  • Simple navigation with a year make model bulb finder ensures you get the right part for your application
  • Clear and quality product photos so you know exactly what you're getting
  • Informational product descriptions
  • Specs and data on nearly every product
  • Install guides for the more complicated items
To Top