Need help? Our customer service team is ready to assist!

1.844.640.3813

Support Center

VLR-15 RESISTOR WP STYLE

Rating:
100 % of 100
SKU
VLR_15_WP
$8.00 $10.00 PER EACH
In Stock
YEAR WARRANTY
DESIGNED IN USA

Exclusive The VLR is by far the cleanest and safest way to add load to any vehicle lighting system. VLR resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR resistors use high temp silicone wiring attached to a male waterproof circular connector.

Mounting The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat, clean metal surface on the vehicle. As an extra precaution: VLR resistors should be mounted out of harm's way and should not touch any plastic or other wiring.

For hardwiring installations, we highly recommended this for a serviceable connection! Using the DuoTap connector, insert both positive and negative wires and squeeze DuoTaps with pliers. It's that easy!

For more information about adding load to your lighting system learn more here.

TECHNICAL SPECS

Current Draw: 0.85A @ 12V | 1.0A @ 14.4V

Plug N' Play Install the inline adapter between factory bulb connector and new input connector (harness, LED, etc.).
Waterproof Fully potted and uses waterproof connectors
Mounting Can be installed with included high temp mounting tape or screws
Safer Temperature Max Temp = 250°F (121°C)
More Information
Current Draw @ 14.4V 1.0A
Operating Voltage 1-18v
Wire Type PVC 80° C
Finish Type Anodized
Dimensions 45mm x 40mm x 12mm
Material 6061 Aluminum
Wire Length 250mm (10")
Contact Material Gold Plated
Resistor Value 15 Ohm
Mounting High Temp Tape
Plug Connection Style 2 Pin Waterproof Plug (WP)
Electrical Connection System Connect
Load Equivalent 1 Turn Signal Bulb w/ V6 Extreme
Temperature (Continuous) 250° F
Temperature (Momentary) 150° F
1x VLR-15 Resistor
1x 3M Mounting Tape

Many online retailers sell standard off-the-shelf LED products, and the options can be overwhelming. Here are ten reasons you can trust us with your LED lighting needs.

1. Our brand
We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential, allowing us to provide you with the best products possible.

2. We're an established company that isn't going anywhere
We've been in business for 18 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys worldwide.

3. Excellent customer service and technical support
We pride ourselves on offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.

4. 25+ years of combined experience
Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.

5. Low-cost, flat-rate shipping with same-day order processing and full visibility tracking.
We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.

6. Secure payments
We accept PayPal, Affirm, and all major credit cards.
 
7. 60-day return
Life gets busy, so you've got time with our 60-day return policy.

8. Great warranty with fast replacements
In most cases, you are not required to ship back your defective item. See details here.

9. Largest selection of LED products and replacement bulbs
We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.

10. Easy to use website
Designed with the user in mind:
 
  • Simple navigation with a year make model bulb finder ensures you get the right part for your application
  • Clear and quality product photos so you know exactly what you're getting
  • Informational product descriptions
  • Specs and data on nearly every product
  • Install guides for the more complicated items
Write Your Own Review
Write a ReviewVLR-15 RESISTOR WP STYLE
To Top