Need help? Our customer service team is ready to assist!

1.844.640.3813

Support Center

10-24 TOYOTA 4RUNNER LED FRONT FOOTWELL KIT DUAL OUTPUT

Rating:
100% of 100
SKU
5G_4R_FWK_F-C
$100.00 $120.00 ON SALE PER KIT

In stock

YEAR WARRANTY
DESIGNED IN USA
1. SELECT YOUR OPTIONS

* Required Fields

2. CONFIRM SELECTION
10-24 TOYOTA 4RUNNER LED FRONT FOOTWELL KIT DUAL OUTPUT
10-24 TOYOTA 4RUNNER LED FRONT FOOTWELL KIT DUAL OUTPUT

In stock

$100.00

ON SALE PER KIT
Summary

    Get the look and feel of a modern luxury vehicle. Footwell lighting gives a sense of spaciousness and comfort while providing illumination to the darkest areas. Adding light to both driver and passenger footwell areas is easy with a VLEDS 4Runner footwell kit!

    Dual Output The PWM dimmer module allows for two output modes depending on the scenario.

    • COURTESY MODE: The lights are at full output (200LM per side) when the door is open and fades out with the map and dome light when the door is closed.
    • NIGHT MODE: This gives you an adjustable low output light when the door is closed, and the parking or headlights are switched on. This drops the output to approximately 10LM on the lowest setting. If you want it brighter use the included screwdriver and turn it up to your liking.

    Plug-n-Play No splicing or tapping into your factory wires! The Redside Electric OEM-style breakout harness simply plugs into the A-pillar wiring harness. From there, connections are easily made to the PWM module and two striplight bars. For more detailed instructions, see the instructions tab.

    5X Brighter The striplight bars are small in size but produce a huge amount of light compared to cheap flexible strip lights that are ten times the size. No plastic or fiberglass parts here! The circuit boards are aluminum metal core PCBs housed in a CNC'd aluminum (not cast) body, then finished with a high-quality exterior-grade black anodizing. They not only look amazing, but they will last you for years!

    ATTENTION! Not compatible with 2022+ Multi-Terrain Monitor equipped models.

    Rear add-on kits are also available. See our recommended products below.

    Easy Install Plug and play OEM-style breakout harness (installs behind driver a-pillar)
    Aluminum Beautifully CNC'd all-aluminum body striplight bar with satin black anodized finish
    Driver Built-in current limiting resistor and diode protects the strip from reversed polarity installation
    Connections Over-molded 2 pin connectors for easier installation and better reliability
    Mounting Super-strong 3M double-sided tape for mounting
    Proprietary 21x 3014 chips mounted to on an aluminum PCB that match all VLEDS LED bulbs
    More Information
    Output 400LM TOTAL
    Current Draw @ 14.4V 0.5A
    Operating Voltage 12-18V
    Light Source 3014 Proprietary Chip
    Driver Style Resistors
    Write Your Own Review
    Write a Review10-24 TOYOTA 4RUNNER LED FRONT FOOTWELL KIT DUAL OUTPUT
    2x BAR_21 LED Bar Light
    2x BAR_21 LSE VHB Tape for Smooth Surfaces
    1x VLEDS High/Low PWM Dimmer
    1x Dimmer LSE Mounting Tape
    1x PWM Adjustment Screwdriver
    1x Redside Electric OEM-style Breakout Harness
    1x Triangle Pry Tool
    1x 4 Foot Wire Extension
    8x Small Zip Ties

    Which color should I choose?

    Color temperature is primarily a style choice, but the human eye does perceive a whiter light as being brighter. The image below shows a side-by-side comparison of our six choices. 5000K is natural white, 5500K is pure white, and 6000K is white with a tint of blue. As for the color options, Aqua is a very close match to the backlighting of the buttons and switches. Blue is a deep true blue, and of course, Red is a vibrant rich red. Choosing a color is ultimately it's up to you depending on your lighting goals. The higher Kelvin number DOES NOT mean the light will be brighter, in fact, it is quite the opposite. The higher the Kelvin the lower the output.

    Will the color match my off-brand LED bulbs?

    It's nearly impossible to get an EXACT match in color temperature because of variations in the manufacturing of LED products. The only way to make sure that you get a perfect match between products is to purchase all your LEDs from us as we have the highest standards in color temperature accuracy.

    Ten Reasons Why

    Many online retailers are selling standard off-the-shelf LED products. There are so many options that it gets overwhelming.

    Here are the ten reasons you can trust us with your LED lighting needs.

    1. Our brand

    We design and develop our products in-house. We are not a traditional reseller. We employ designers, mechanical engineers, and electrical engineers. Fitment, color, performance, and reliability are essential and allow us to provide you with the best products possible.

    2. We're an established company that isn't going anywhere

    We've been in business for 18 years and have built an excellent reputation among automotive lighting enthusiasts. We are trusted and recommended by car and truck guys all over the world.

    3. Excellent customer service and technical support

    We pride ourselves in offering first-class support to our customers. When you call or email us, you're talking to a person with years of knowledge and experience in the industry.

    4. 25+ years of combined experience

    Our staff is extremely knowledgeable and works firsthand with our products, from concept to installation. They know the ins and outs of every product we sell.

    5. Low-cost, flat-rate shipping with same-day order processing and full visibility tracking.

    We have a fast, efficient pick-and-pack system with barcode scanning. Your order will be accurate and well-packaged for safe delivery to your door. Our shipping team provides you with order communication every step of the way.

    6. Secure payments

    We accept PayPal, Affirm, and all major credit cards.

    7. 60 day return

    Life gets busy, so you've got time with our 60 day return policy.

    8. Great warranty with fast replacements

    In most cases, you are not required to ship back your defective item. See details here.

    9. Largest selection of LED products and replacement bulbs

    We make an LED replacement for nearly every bulb on your vehicle. We have several options and price points in many categories to meet your needs. Everyone has different tastes in color, so we offer up to 3 different kelvin ratings in our white LEDs, whereas the other guys only offer one.

    10. Easy to use website

    Designed with the user in mind:

    • Simple navigation with a year make model bulb finder ensures you get the right part for your application
    • Clear and quality product photos so you know exactly what you're getting
    • Informational product descriptions
    • Specs and data on nearly every product
    • Install guides for the more complicated items
    To Top