LPR LED BACK-UP REVERSE LIGHT SYSTEM 5500K WHITE

Part #: LPR_72_W

Share

As low as: $100.00 EACH

Price as configured: $0.00

EACH

Save $15 use code LPR15

Description

License Plate Reverse: You are looking at our all new LPR back-up lighting system. Made of 6061 CNC'd aluminum with two finish options to choose from: polyurethane gloss black finish, and an exterior grade anodized satin finish. The LPR uses 72 high output 5500K LEDs producing 1500LM to light up the world behind you!

Simple Installation: Tap into your back up light bulb wires, fasten the bar over your license plate and you're done!

Safety Added: Provide yourself and others around you with more light to see, and be seen by. This Reverse Light System is brighter than any other LED replacement bulb we sell! Enjoy the simplest and brightest LED back-up system on the market... guarantee you'll love it!

FEATURES

Output 1800lm measured output (5X brighter than a standard reverse light)
LED Type 72X 0.5W 2835 5500K (perfect match to all VLEDS products)
Lens UV resistant polycarbonate
Waterproof Potted and sealed for IP68 rating
Fasteners 2x 304 stainless steel M6 x 1.0 fasteners included
Body Material All aluminum CNC machined construction
Surface Finish Gloss black polyurethane and satin black exterior grade anodized.
Camera Enhances back-up camera and does not blow out the feed
Efficient Current Draw ~2A @ 12V
Driver Dual internal 8-18V constant current drivers - no box to mount!
Connector 2 pin waterproof plug with grommet, and 6ft extension wire
Wiring Includes DuoTap and 10ft wire extension to reach reverse light wires on any vehicle

NOTE: For newer trucks with CAN bus or BCM's we recommend installing our LED bulbs to lower the current draw in the factory reverse light housing or remove the factory incandescent bulbs completely to prevent overloading the circuit. Keep in mind you will be adding 2A to the circuit and some systems will fault from the additional load. Alternatively you can wire the LPR into the back of the trailer harness which is an entirely separate circuit.

US PATENT PENDING

[More] [Less]

* Required Fields

Price as configured: $0.00

Availability: In Stock



License Plate Reverse: You are looking at our all new LPR back-up lighting system. Made of 6061 CNC'd aluminum with two finish options to choose from: polyurethane gloss black finish, and an exterior grade anodized satin finish. The LPR uses 72 high output 5500K LEDs producing 1500LM to light up the world behind you!

Simple Installation: Tap into your back up light bulb wires, fasten the bar over your license plate and you're done!

Safety Added: Provide yourself and others around you with more light to see, and be seen by. This Reverse Light System is brighter than any other LED replacement bulb we sell! Enjoy the simplest and brightest LED back-up system on the market... guarantee you'll love it!

FEATURES

Output 1800lm measured output (5X brighter than a standard reverse light)
LED Type 72X 0.5W 2835 5500K (perfect match to all VLEDS products)
Lens UV resistant polycarbonate
Waterproof Potted and sealed for IP68 rating
Fasteners 2x 304 stainless steel M6 x 1.0 fasteners included
Body Material All aluminum CNC machined construction
Surface Finish Gloss black polyurethane and satin black exterior grade anodized.
Camera Enhances back-up camera and does not blow out the feed
Efficient Current Draw ~2A @ 12V
Driver Dual internal 8-18V constant current drivers - no box to mount!
Connector 2 pin waterproof plug with grommet, and 6ft extension wire
Wiring Includes DuoTap and 10ft wire extension to reach reverse light wires on any vehicle

NOTE: For newer trucks with CAN bus or BCM's we recommend installing our LED bulbs to lower the current draw in the factory reverse light housing or remove the factory incandescent bulbs completely to prevent overloading the circuit. Keep in mind you will be adding 2A to the circuit and some systems will fault from the additional load. Alternatively you can wire the LPR into the back of the trailer harness which is an entirely separate circuit.

US PATENT PENDING

  • Warranty: 3 Year
  • Output Lumens: 1800LM
  • Operating Voltage: 12-18V
  • Base Number: No
  • Compatible Bases: No
  • Series: No

Step 1:

  • Input the year, make, and model of your vehicle into our Bulb Finder at the top of any page on our website. Some vehicles have a qualifier which denotes HID/halogen headlights or a certain trim level.

Step 2:

    • Select the bulb type that you are looking to replace.
    • After selecting the bulb, the next page to load is the base type matching the stock bulb in your vehice. Only some colors are available in certain categories as the color is mandated by law. For example, all brake/tail light bulbs are required to be red in color.

Step 3:

  • After you have added the bulb to your cart, select another bulb type on the far right of the Bulb Finder navigation and it will send you to a new page with all of the bulbs in the new location.
  • Continue to navigate this way to find the rest of the bulbs for your vehicle.
  • Note: Although your vehicle is saved at the top of the page, it does not mean that the entire website is filtered for your vehicle. Only pages that you reach by selecting the bulb type in our Bulb Finder will be correct for your vehicle.

IMPORTANT NOTE:

THE VLEDS BULB FINDER SHOULD ONLY BE USED AS A GUIDE. CHECK THE HOUSING, DIMENSIONS, BASE AND PART NUMBER OF YOUR CURRENT BULB TO DETERMINE IF YOU ARE BUYING THE CORRECT LED PRODUCT. WE DO NOT GUARANTEE THE ACCURACY OF THE REPLACEMENTS LISTED.

Warranty Info

Return a Product

Exchange a Product


DAMAGED PRODUCTS

If your product has been damaged in shipment, you must contact us via phone or email within 24 hours of receipt and we will provide you with return/replacement information.

PRICE PROTECTION

Prices are subject to change without notice. We do not offer post order price matching if a price changes.

CONTACT US

Have questions or comments? Click here to contact us.
Thank you for shopping at VLEDS and enjoy a brighter life!

All orders are processed and shipped from our facility in Bellingham WA. Orders are shipped same day (by 3pm PST) or next day of receiving your payment. Orders are not processed or shipped on Saturday or Sunday. In the event of delays, every effort will be made to contact you by E-mail. If the delay is due to backorder, you will receive notice by email and be given the choice to remain on backorder, substitute to another item, or cancel your order. An email is sent to confirm that your order has been received and is being processed.

Standard Shipping - Domestic

For only $5 your entire order ships using USPS First Class Mail | 5-7 business days Saturday included.

Expedited 2-Day Shipping - Domestic

Need it fast? We'll get it to you in 2 days for $10. Your order will ship using FedEx 2 Day Express | 2 business days with Saturday delivery. Saturday delivery is not available to extended service areas. For an explanation of FedEx Express Freight service areas and delivery commitment times, see Express Freight Delivery Commitments. To check on the service area for your shipment, use the Service Area Locator or call 1.800.332.0807. Larger Domestic orders (in excess of 3-4 kits) will be sent USPS Priority due to limitations on size of FedEx Express shipmentsa nd may take one extra day for delivery.

International Express Flat Rate

For an incredibly low rate of $15 plus we pay duties & taxes any size order gets to you in 1-3 days! Delivery to major cities in Canada and Mexico typically take 1 business day. Major cities in Europe and Asia typically take 2 business days. Promo excludes outlying areas. 1-3 day delivery is an estimate and not a guarantee.

Backorder Shipments - Domestic

By default any items that are in stock will be shipped using the original shipping method. Any items on backorder will be ship on a second shipment with the method of our choosing. This second shipment will be held until ALL backordered items return to stock. If a customer would like to have an additional shipment when one of the backordered items returns to stock they will be charged this shipping cost. Contact us via our ticketing system if you would like to arrange an additional shipment or upgrade the backorder shipping method.

Backorder Shipments - International

If an international shipment contains a backordered item the order will be held until it can be shipped in its entirety. There are no exceptions to this policy.

Shipping to PO Boxes

UPS and FedEx will not deliver to PO Boxes. Orders shipped to a PO Box will be sent USPS First Class (Standard) or USPS Priority (Expedited).

Customer Reviews

Best for Acura MDX Review by Edward
Performance
Quality
Ease of installation
Recommend this product to others
I had purchased replacement LED lighting to improve the reverse camera view. This whom own an MDX know what I referring to. Reverse lighting and license plate led help a bit, till the lighting on plates were installed.... that’s where lighting was fully exposed! Installing on tail gates requires work but worth it. Thanks! (Posted on 4/30/19)
READ CAREFULLY BEFORE PURCHASE Review by SLOW350
Performance
Quality
Ease of installation
Recommend this product to others
This LPR light output is insanely strong, worth the money BUT improvement needed!!

If you have a sedan like me, chances are your LPR will be blasting ton of lights in people faces instead of the ground without mod. I had to tape a thick foam on the top to make it more perpendicular with the ground.
(Posted on 3/15/19)
Wow Review by Brent
Performance
Quality
Ease of installation
Recommend this product to others
This light is way more then I expected I figured if it didn't live to what I wanted then I would return it. At $100 I really was already on the line if I wanted it so it had to show up and work perfectly and be bright enough otherwise it was definitely going back. But this light lives up to what I expected. If you can imagine installed a light pod on the back of your vehicle that's what this tiny light does. I will post pictures to there Instagram of before and after. I have tinted windows on a GMC Envoy and with the stock reverse lights I couldn't look out the rear window at night to see anything. Now I can look out and see everything. (Posted on 3/11/19)
You Need This Review by Jason
Performance
Quality
Ease of installation
Recommend this product to others
If you are looking at the $100 price tag and wondering if it is worth it...the answer is yes. It has a sleek low-profile look for your vehicle but packs a punch when turned on. (Posted on 2/1/19)
Exactly What I Was Looking For Review by TS
Performance
Quality
Ease of installation
Recommend this product to others
I bought this for my 2015 Tacoma. The stock reverse lights weren't quite getting the job done for me. This light bar was exactly what the doctor ordered. It is easy to install and puts out a lot of light. No more worries about missing something in the camera at night and there is no doubt from people behind me that I am backing up. Great product. (Posted on 1/31/19)
B R I G H T Review by Enrique
Performance
Quality
Ease of installation
Recommend this product to others
Holy... Uh... Yeah. It is BRIGHT. I already have VLEDs HO reverse lights and they're bright, but I have a hatchback my reverse camera is miles away from my reverse lights, so night time reversing rendered my camera useless. I had to extend the wires about 4 feet for my own installation, but oh man, is it worth it! (Posted on 12/5/18)
Bright beauty Review by Ron
Performance
Quality
Ease of installation
Recommend this product to others
Very inconspicuous when off. Brighter than anything else when lit. Loved the old one. Love this one even more. (Posted on 11/30/18)
Easy install Review by Rick
Performance
Quality
Ease of installation
Recommend this product to others
Very easy install , took about 20 minutes , great light output , was very concerned about the light output and reverse camera .. but it looks great ! (Posted on 11/19/18)
Lpr 2016 tundra Review by Leo
Performance
Quality
Ease of installation
Recommend this product to others
Great product , easy to install. Very bright, Mounted the LPR over my carbon fiber lic plate frame, all you have to do is get longer screw, 1” screws are sufficient, and very secure.

The only thing had issue with is the wire tap that was included, my 2016 Toyota Tundra OEM wires are to thick to use the tap, so just wired the LPR straight to the OEM wiring solder or just electric tape etc ...

Easy install just run the wires back of the lic plate, there is a hole already in the tundras by the spare tire, Wired it into the reverse light socket 2 wires only, (remove right side taillight ) blue with red strip is the positive, white with black strip is ground. On the LPR wires positive is the wire with a light gray/white strip on it.

Fyi you can always just find the 2 wires for the reverse light just under the right side rear bumper, instead of removing the taillight, now that you know which color wires you need, it’s easier that way. (Posted on 11/16/18)
Great accessory Review by George
Performance
Quality
Ease of installation
Recommend this product to others
Very happy with this reverse light . I installed it on my 2015 F150 , took about a half hour :) (Posted on 11/15/18)
Great output! Review by Bryan
Performance
Quality
Ease of installation
Recommend this product to others
Bought this for my lifted Tundra and am very happy with the light output and quality of the product. (Posted on 11/11/18)
High quality product Review by Kevin
Performance
Quality
Ease of installation
Recommend this product to others
Install is pretty straight forward and doesn't need instructions. The only thing that I wish it was able to do was go on top of a license plate frame. The only way you can fit this securely is if you have no frame. (Posted on 11/10/18)
Lots of light. Too short wire. Highly recommended Review by Steve from Ohio
Performance
Quality
Ease of installation
Recommend this product to others
Just got a new 2018 Toyota Prius. The backup lights are OK but I wanted more light. Saw the LPR LED Back up reverse light system and thought it was a good idea. So I put mine on order and it took about a month to get. Seems that these things are selling really well.

Just got a call from my car dealer that my plates were in and the same day I got the LPR in the mail. Perfect!

Opened the box and I was impressed with the high quality of this backup light system. Fits over the license plate (tabs down for those who install this themselves!)

The one thing I immediately noticed was that the supplied wire was about two feet short. I had to splice in some 14 gauge wire to make it fit. The snap on connection I did not bother with. I always solder electrical connections and then hit it with liquid tape, let it dry and then tape it with high quality electrical tape.

For the Prius and most other cars, you will need to remove the plastic trim inside the car to wire this thing up. I used a 1/2 drill bit to make the hole that the rubber grommet and wire fit in. With the Prius, you will need to remove the passenger side rear light assembly. Snap out the black plastic cover and then two bolts need to be removed. Slide the assembly out....but you cannot remove it as it is wired up. I then sliced the insulation off the two wires that go into the backup light and then connected the two wires from the LPR and soldered and taped them up.

Put it all back together and was amazed at the light output of this thing. Makes backing up at night so much better. Just order it.
It's on back order right now as of 11/10/18 so it may take a while for them to make more of these things.

I highly recommend this product. (Posted on 11/10/18)
Well worth the money Review by Josh
Performance
Quality
Ease of installation
Recommend this product to others
Other then having no installation instructions in the packaging, it’s pretty straight forward. Took a half hour to install and the output puts my current led reverse lights to shame. Well worth investing in. (Posted on 11/9/18)
Excellent quality! Review by Serge
Performance
Quality
Ease of installation
Recommend this product to others
Installed this on my 2009 VW Routan SEL Premium. Drilled a hole directly behind the license plate. Light output is pretty amazing! Quality is top notch. Looks like it will definitely last a long time.
When you hook up the wires, the connections are polarity sensitive, so make sure you test them to tap the correct side into the positive and negative. Drilling a 7/16 hole like instructed was a bit scary, but the grommet fit perfectly.
I would suggest you work from the license plate to your power source making sure the wires don't entangle in or interfere with a latch mechanism of your trunk or lift gate.
Also while the hex screws are a nice touch, they won't work for every vehicle, so this would be a perfect time to upgrade to security bolts from your local auto parts store.

Overall I'm very happy with the LPR! (Posted on 11/7/18)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

CONTACT US