VLR PRO SAFE LOAD TURN SIGNAL RESISTOR EQUALIZER

Part #: VLR-C

Share

As low as: $10.00 EACH

Price as configured: $0.00

EACH

  

Description

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the optional DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male 9005/9006 plug.

Electrical: Where tapping into your factory wiring is needed, you'll need purchase the optional hard wire adapter in the Select Options area below. If you ever need to upgrade or service the resistor simply remove and plug the new one in. If you have our V3 Triton LED turn signal system, the VLR Pro conveniently plugs directly into the controller.

Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harms way and should not touch any plastic or other wiring.

Learn more about adding load to your lighting system HERE.

TECHNICAL SPECS

VLR-6
Current Draw: 1.9A @ 12V | 2.25A @ 14.4V
Load = 1 standard filament bulb (equivalent wattage: 25W)

VLR-3
Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)

DuoTap Harness
The DuoTap harness is highly recommended for an quick and easy no cutting connection! They literally take just minutes to install! Using the DuoTap connectors, insert one ground/chassis wire, and one turn/brake wire. Fill with supplied Dielectric Grease, and squeeze DuoTap closed with pliers.

[More] [Less]

Select Options

Not sure? Click HERE

* Required Fields

Price as configured: $0.00

Availability: In Stock

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the optional DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male 9005/9006 plug.

Electrical: Where tapping into your factory wiring is needed, you'll need purchase the optional hard wire adapter in the Select Options area below. If you ever need to upgrade or service the resistor simply remove and plug the new one in. If you have our V3 Triton LED turn signal system, the VLR Pro conveniently plugs directly into the controller.

Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harms way and should not touch any plastic or other wiring.

Learn more about adding load to your lighting system HERE.

TECHNICAL SPECS

VLR-6
Current Draw: 1.9A @ 12V | 2.25A @ 14.4V
Load = 1 standard filament bulb (equivalent wattage: 25W)

VLR-3
Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)

DuoTap Harness
The DuoTap harness is highly recommended for an quick and easy no cutting connection! They literally take just minutes to install! Using the DuoTap connectors, insert one ground/chassis wire, and one turn/brake wire. Fill with supplied Dielectric Grease, and squeeze DuoTap closed with pliers.

  • Title: VLR PRO LED LOAD EQUALIZER RESISTORS TURN SIGNAL BLINKER FIX
  • Base Number: No
  • Series: No
  • CANBUS Proof (Y/N): No
  • DUAL Polarity (Y/N): No

Step 1:

  • Input the year, make, and model of your vehicle into our Bulb Finder at the top of any page on our website. Some vehicles have a qualifier which denotes HID/halogen headlights or a certain trim level.

Step 2:

    • Select the bulb type that you are looking to replace.
    • After selecting the bulb, the next page to load is the base type matching the stock bulb in your vehice. Only some colors are available in certain categories as the color is mandated by law. For example, all brake/tail light bulbs are required to be red in color.

Step 3:

  • After you have added the bulb to your cart, select another bulb type on the far right of the Bulb Finder navigation and it will send you to a new page with all of the bulbs in the new location.
  • Continue to navigate this way to find the rest of the bulbs for your vehicle.
  • Note: Although your vehicle is saved at the top of the page, it does not mean that the entire website is filtered for your vehicle. Only pages that you reach by selecting the bulb type in our Bulb Finder will be correct for your vehicle.

IMPORTANT NOTE:

THE VLEDS BULB FINDER SHOULD ONLY BE USED AS A GUIDE. CHECK THE HOUSING, DIMENSIONS, BASE AND PART NUMBER OF YOUR CURRENT BULB TO DETERMINE IF YOU ARE BUYING THE CORRECT LED PRODUCT. WE DO NOT GUARANTEE THE ACCURACY OF THE REPLACEMENTS LISTED.

Warranty Info

Return a Product

Exchange a Product


DAMAGED PRODUCTS

If your product has been damaged in shipment, you must contact us via phone or email within 24 hours of receipt and we will provide you with return/replacement information.

PRICE PROTECTION

Prices are subject to change without notice. We do not offer post order price matching if a price changes.

CONTACT US

Have questions or comments? Click here to contact us.
Thank you for shopping at VLEDS and enjoy a brighter life!

SHIPPING INFORMATION

All orders are processed upon receipt. Actual shipping times may vary. Most orders are shipped same day or next day of receiving your order. Orders are not processed or shipped on Saturday or Sunday. In the event of delays, every effort will be made to contact you by email. If the delay is due to backorder, you will receive notice by e-mail and be given the choice to remain on backorder, substitute to another item, or cancel your order. An email is sent to confirm that your order has been received and is being processed.

CALCULATE SHIPPING:

To calculate shipping cost and transit time, simply add the desired items to your cart and use the shipping quote tool.

*Weekends and holidays are not included in shipping times. First-Class exclusions apply on larger items (V3's, LED Headlights, HID Kits, and small item orders over $100). Items shipping to AK HI PR ship Priority Mail only.

INTERNATIONAL BUYERS PLEASE NOTE:

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to buying.

These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Do not confuse them for additional shipping charges.

We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.

All International orders are processed 3 times a week. Actual shipping times may vary. Most orders are shipped within 3 days of receiving your order. No orders are processed or shipped on Saturday or Sunday. In the event of delays, every effort will be made to contact you by E-mail. If the delay is due to backorder, you will receive notice by e-mail and be given the choice to remain on backorder, substitute to another item, or cancel your order. An email is sent to confirm that your order has been received and is being processed.

Q: Can I track Priority Mail International?

A: Priority Mail International has delivery information limited only to major destinations. The only international mail service that offers full tracking is Express Mail service (including Global Express Guaranteed and Express Mail International). Tracking information includes various scans as they are available.

We will only accept verified PayPal payments on all international orders.

Have questions or comments? Click here to contact us. 

Thank you for shopping at VLEDS and enjoy a brighter life!

Customer Reviews

Great service and product Review by Brad
Performance
Quality
Ease of installation
Recommend this product to others
First, Eli on phone sales; patient, knowledgeable and a good listener. (made a great suggestion that saved unnecessary component installation in the end)

Product delivery, arrived, cross border, next day.

Components, WELL thought out products, the lights fit as they should, the resistors well planned for mounting and streamlined placement. The wire harnesses that come with the kit are of first rate and have lots of length to accommodate literally any mounting requirement.

Not one negative thing to say about the product or the people! (Posted on 5/30/17)
Super fast and easy! Review by Nick
Performance
Quality
Ease of installation
Recommend this product to others
I've tried using the standard resistors on my previous car and they just never worked. I was able to replace the relay but that required taking my entire dashboard apart. I didn't want to do that on my new car. A friend recommended I try these and good lord this made it so easier. The resistors are very high quality and I trust they won't set my car on fire unlike the eBay resistors. I highly recommend these! (Posted on 4/24/17)
Quick simple to install - 2017 Toyota Tundra Review by dhg
Performance
Quality
Ease of installation
Recommend this product to others
Simple installation esy to connect with duoharness. (Posted on 4/9/17)
Used on 2012 Jeep Wrangler JKUR Review by Linc
Performance
Quality
Ease of installation
Recommend this product to others
I used the VLR-6's with the VLEDS WHITE HV AMBER SWITCHBACK 3157 (3157_42_HV_WA-C) in front and another set at the rear for the VLEDS RED 360° 9 LED 3156 3157 (3157_9_R). Both sets worked perfectly, and look great too, I like that they have connectors in between the resistor and the pigtail splice, allowing for easy removal if required. Great product! (Posted on 2/14/17)
Must have for LED Flasher upgrades Review by John
Performance
Quality
Ease of installation
Recommend this product to others
Excellent design and easy installation. This is a must-have for LED turn signal/flasher installations. Much better than the gold 50 W resistors. (Posted on 2/11/17)
So easy! Review by James
Performance
Quality
Ease of installation
Recommend this product to others
I have used other resistors on a previous vehicle. These resistors beat them hands down. Incredibly easy to attach and install. Won't use anything else from now on. (Posted on 1/23/17)
Works great! As advertised. Review by Sergey
Performance
Quality
Ease of installation
Recommend this product to others
These are definitely well built, included 3M tape is super sticky so no need to worry about them staying in place.

In my situation I already had t-tap quick connectors installed, so all I had to do was snip the included connector off, clear the wires, crimp on the male connectors and I was done.

They work as advertised, and are backed by easily the best warranty on the LED market. What more can you ask for? (Posted on 7/5/16)
Awesome! Review by Enrique
Performance
Quality
Ease of installation
Recommend this product to others
I have a 2008 Mazdaspeed3 and I got some switchback LEDs. Hyperflash was expected, so I looked online for an LED flasher. Turns out the Mazda doesn't have a flasher! Resistors are the only way to go. These look AMAZING. Very high tech and they work very very well and are SO easy to install. Definitely recommend! (Posted on 6/16/15)
Awesome! Got my signals back to normal Review by J. Madera
Performance
Quality
Ease of installation
Recommend this product to others
So I have an 08 mustang GT, I installed the Triton switchback system and loved it, except it caused a hyper blink.

I am not an electrician by an means, so after doing research I found I needed 6 ohm resistors.

I came here and found the best! A little more pricey than other brands but with all the added benefits it was well worth the cost. I went whole hog and bought all the pigtails, splices and mounting tape to go with them.

took about 20 minutes to install and fixed the hyper blinking issue I had for a while.

Very easy install, a ground, a tap and mount the box!

The larger surface area should help wit the heat.

Everything is well planned for you. Super easy to install! (Posted on 6/5/15)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

CONTACT US