VLR PRO 25 PARKING LIGHT RESISTOR

Part #: VLR_25-C

Share

As low as: $4.00 EACH

Price as configured: $0.00

EACH

Be the first to review this product

Description

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the optional DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a 2 pin waterproof plug.

Electrical: Where tapping into your factory wiring is needed, you'll find the included DuoTap harness is as easy as it gets. If you ever need to upgrade or service the resistor simply remove and plug the new one in.

Learn more about adding load to your lighting system HERE.

TECHNICAL SPECS

Current Draw: 0.5A @ 12V | 0.55A @ 14.4V
Load = 6W @ 12V
Max Operating Temp = 225° F

DuoTap Harness
The DuoTap harness allows for an quick and easy no cutting connection! They literally take minutes to install! Using the included DuoTap connectors, insert one ground/chassis wire, and one on the positive wire (polarity does not matter). Fill with supplied Dielectric Grease, and squeeze DuoTap closed with pliers.

[More] [Less]

 

Price as configured: $0.00

Availability: In Stock









The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system. With the optional DuoTap Harness splicing the VLR Pro into your factory wiring doesn’t get any easier. Simply position the wires and click the DuoTap closed with a pair of pliers.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a 2 pin waterproof plug.

Electrical: Where tapping into your factory wiring is needed, you'll find the included DuoTap harness is as easy as it gets. If you ever need to upgrade or service the resistor simply remove and plug the new one in.

Learn more about adding load to your lighting system HERE.

TECHNICAL SPECS

Current Draw: 0.5A @ 12V | 0.55A @ 14.4V
Load = 6W @ 12V
Max Operating Temp = 225° F

DuoTap Harness
The DuoTap harness allows for an quick and easy no cutting connection! They literally take minutes to install! Using the included DuoTap connectors, insert one ground/chassis wire, and one on the positive wire (polarity does not matter). Fill with supplied Dielectric Grease, and squeeze DuoTap closed with pliers.

  • Warranty: 1 Year
  • Base Number: No
  • Compatible Bases: No
  • Series: No

Step 1:

  • Input the year, make, and model of your vehicle into our Bulb Finder at the top of any page on our website. Some vehicles have a qualifier which denotes HID/halogen headlights or a certain trim level.

Step 2:

    • Select the bulb type that you are looking to replace.
    • After selecting the bulb, the next page to load is the base type matching the stock bulb in your vehice. Only some colors are available in certain categories as the color is mandated by law. For example, all brake/tail light bulbs are required to be red in color.

Step 3:

  • After you have added the bulb to your cart, select another bulb type on the far right of the Bulb Finder navigation and it will send you to a new page with all of the bulbs in the new location.
  • Continue to navigate this way to find the rest of the bulbs for your vehicle.
  • Note: Although your vehicle is saved at the top of the page, it does not mean that the entire website is filtered for your vehicle. Only pages that you reach by selecting the bulb type in our Bulb Finder will be correct for your vehicle.

IMPORTANT NOTE:

THE VLEDS BULB FINDER SHOULD ONLY BE USED AS A GUIDE. CHECK THE HOUSING, DIMENSIONS, BASE AND PART NUMBER OF YOUR CURRENT BULB TO DETERMINE IF YOU ARE BUYING THE CORRECT LED PRODUCT. WE DO NOT GUARANTEE THE ACCURACY OF THE REPLACEMENTS LISTED.

Warranty Info

Return a Product

Exchange a Product


DAMAGED PRODUCTS

If your product has been damaged in shipment, you must contact us via phone or email within 24 hours of receipt and we will provide you with return/replacement information.

PRICE PROTECTION

Prices are subject to change without notice. We do not offer post order price matching if a price changes.

CONTACT US

Have questions or comments? Click here to contact us.
Thank you for shopping at VLEDS and enjoy a brighter life!

All orders are processed and shipped from our facility in Bellingham WA. Orders are shipped same day (by 3pm PST) or next day of receiving your payment. Orders are not processed or shipped on Saturday or Sunday. In the event of delays, every effort will be made to contact you by E-mail. If the delay is due to backorder, you will receive notice by email and be given the choice to remain on backorder, substitute to another item, or cancel your order. An email is sent to confirm that your order has been received and is being processed.

*Free Shipping - Domestic

In most cases our Standard Free Shipping option will be shipped via USPS First Class. We reserve the right to choose the shipping method during processing. If you would like a specific shipping method we recommend choosing from the other low-cost options we have available.

Flat Rate International

$20 Duties & Taxes Paid 1-3 day shipping any order. Delivery to major cities in Canada and Mexico typically in 1 business day, and major cities in Europe, Asia by noon typically in 2 business days. Promo excludes outlying areas. 1-3 day delivery is an estimate and not a guarantee. Buyer is responsible for all taxes and duty unless optional Duties Paid is selected at checkout.

Backorder Shipments - Domestic

By default any items that are in stock will be shipped using the original shipping method. Any items on backorder will be ship on a second shipment with the method of our choosing. This second shipment will be held until ALL backordered items return to stock. If a customer would like to have an additional shipment when one of the backordered items returns to stock they will be charged this shipping cost. Contact us via our ticketing system if you would like to arrange an additional shipment or upgrade the backorder shipping method.

Backorder Shipments - International

If an international shipment contains a backordered item the order will be held until it can be shipped in its entirety. There are no exceptions to this policy.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

CONTACT US